How To Remove Printer Ink From Clothes

How To Remove Printer Ink From Clothes [Quick Solution]

Printing is an important job. We use printers in our offices and also in our homes for our personal use. While using printers or cleaning them, we may have printer-ink stains in our clothes, skin, carpet, or other things around the printer. This becomes very irritating, and sometimes, you may need to dump your clothes for the printer ink stains. 

How to remove printer ink from clothes? If you learn how to clean ink stains from your clothes, you do not have to lose your clothes or other clothing things. Learn some practical methods in this article. There are different methods for removing fresh printer ink stains and old printer ink stains. Both are described here step by step guide.

Printer ink is hard to remove. A regular wash cannot clean it up. So, you have to learn the process and know the material that can clean the color from the fabric. 

How To Remove Printer Ink From Clothes: Handy Methods

Printer ink is basically oil-based ink. It is pretty hard to remove, but your work will be more accessible if you clean them wisely following the system described below. 

1. Fresh Printer Ink Removal Process from Fabric

At first, let’s know how to remove fresh printer ink from clothes. It is easier to remove fresh printer ink than old ink. Follow the steps below. Now you have to dab the stain and a clean cloth to dab it is fine. A  wet sponge to dab the stains also right. Keep dabbing until the ink stops being lifted. 

Step-1: Let it dry for a few minutes. Now take hair spray or rubbing alcohol spray and spray it on the stain.

How To Remove Printer Ink From Clothes

Step-2: After keeping the stain rest for a while, take two paper towels. Place the stained fabric on one paper towel. Then place another paper towel on it. Now, blot over the settings slightly from the backside of the stained fabric. It will put force on the stain and let the paint out to the paper towel. 

Step-3: Keep pressing on the paper towel so that the stain comes out and transfer it to other paper towels. After every pressing, move the stained cloth and again press. If you repeatedly press, keeping it in one place, the stain cannot be transferred to the same spot as the paper towel. Even if you need a new paper towel, use it and keep pressing on the color until it is clear. 

Though this process takes time, it is pretty easy, and only a hairspray or a rubbing alcohol spray can remove fresh stain from the fabric. 

2. Toner Ink Removal Process

Though toner is not liquid-based ink like the inkjet printer ink, it is powdery ink. But if you do not handle the laser printer carefully, messing it up is common. Follow the steps below to clean the toner from the fabric.

Step-1: First, use the vacuum cleaner over the stained spot to remove the loosened toner from the cloth. You have to do it before take-off the fabric. After cleaning the loosened powdered toner, it is time to wash the stain and take off your cloth.

Step-2: Take a bristled brush and clean the toner off softly. You should not rub the cloth with the brush as it can weaken the fabric or tear it. Besides, rubbing the material with the brush can insert the toner ink deep inside.

As an alternative to the bristled brush, you can use a piece of dry cloth or towel. Brush the stain off using this cloth.

How To Remove Printer Ink From Clothes

Step-3: Take another clean piece of cloth and damp it with rubbing alcohol. Make sure that the fabric is absorbent type. Now press this cloth on the toner ink stain. After a while, you will see that it has removed the color a bit. 

Step-4: Take a hairspray and then spray it on the stained area of the cloth heavily. Then press it with a clean cloth from both sides. Now wash the fabric using cold water. You should not use any heat. That is why you have to use cold water to wash the stained cloth. You also do not use the dryer to dry the fabric. Heat can fuse the stain to the material again. 

After washing the cloth, you will get a clean cloth. 

3. Old Printer Ink Removal Process from Fabric

It is wise to remove printer ink from the fabric before it gets dry or old. The old printer ink stain is hard to remove. But it is not impossible. Follow the steps below and clean all the hard and old printer ink from your fabric. 

Step-1: First, take the stained cloth on a flat surface and apply the liquid laundry detergent exactly on the stained area of the fabric. Then a small toothbrush is right to scrub the spot. It will lift the stain a bit. If the color is not so hard, it may have lifted completely.

How To Remove Printer Ink From Clothes

Step-2: If the stain is still there on the fabric, then use bleach. Make a mixture of one part of water and one part of bleach. Now take the mixture on the toothbrush and again scrub the stain using it. It should clean the stain or weaken the paint.

Step-3: After finishing the scrubbing, immediately wash the cloth. The cloth must not dry during the scrubbing process. If the fabric accidentally dries a bit, the stain will set on the material again, and it will be harder to remove for the second time. Besides, drying bleach on fabric can destroy the cloth color.

Step-4: Now, dry the cloth keeping it hanging or flat in the air. Dryer is now suitable to use to dry the fabric up. If you dry using the dryer, it will set the ink on the cloth back.

This is the best way to clean the printer ink, though possible items can wash the cloth. We will discuss other things to remove ink stains from the fabric.

4. Remove Printer Ink by Stain Remover

Stain remover works well in the case of oil-based ink. That is why it is pretty effective for inkjet printer ink. Some stain removers are alcohol-based, and it works better. You can check the packaging where the ingredients are noted. Be sure that the stain remover is fabric friendly. Now, follow the steps below and clean your cloth.

Step-1: First, take a clean white towel and then lay it on a flat surface. Now, place the stained cloth over it. Pour some cold water on the stained area of the fabric.

removing computer printer ink from clothes

Step-2: Now apply the stain remover that is safe for your cloth. Apply only to the stained area. Then rub the stained area a little. A clean piece of cloth is okay to rub the area but a soft-bristled brush for scratching is suitable.  

Step-3: After rubbing it, leave it like this for about 15 minutes or more as the package of the stain remover instructed. Now, rinse the cloth a bit to remove the rubbed stain. Then wash it with cold water.

Now the stain should be gone.

5. Remove Printer Ink by Glycerin

Glycerin is an effective remover for oil-based printer ink stains. It works well on the cotton and polyester fabric type. It also removes stains from wool or silk fabric. However, it is wise to test a small area of the material to be sure that the glycerin is suitable. Follow the steps below.

Step-1: As with the previous process, lay a clean towel on a flat surface and the stained cloth over it. Then soak the stained area of the fabric with cold water.

how to remove printer ink from white clothes

 

Step-2: Apply the glycerin to the stain. Then leave it for 10 to 15 minutes. 

Step-3: Now, apply a mild detergent powder to the stain. Press the stained area slightly and softly. Keep dabbing it gently till the suds come out. 

Step-4: Rinse the stained area using lukewarm water or cold water. Now wash the cloth as usual and get the clean cloth.

It is not wise to scrub or rub the cloth with glycerin. It can weaken the cloth fabric. Instead, only dab it. 

6. Remove Printer Ink by Dish Soap or Laundry Detergent

Alcohol-based dish soap or laundry detergent is an effective cleaner for printer ink stains. So, you have to find and collect alcohol-based soap. Though the dish soap or laundry detergent is safe and suitable for all types of fabric, you should test in a small cloth area.

How To Remove Printer Ink From Clothes

Step-1: Place the stained cloth over a clean towel and then take a clean piece of fabric. Soak the fabric in cold water and then dab the stain using it. Keep wiping until the paint begins to come out. 

Step-2: Apply enough dish soap or laundry detergent on the stained area of the cloth so that it covers. Now leave it like this for at least five minutes.

Step-3: Now, start to scrub the stain softly using a toothbrush. After cleaning it, rinse it with cold water. If there is still some color remaining, scrub it again. Then rinse it and wash it with lukewarm water. Dry it out under the sun. 

7. Remove Printer Ink by Rubbing Alcohol

Rubbing alcohol works better compared to the other options to remove printer ink stains. But it is suitable for cotton or polyester. It is not safe for rayon, wool, silk, delicate fabric as rubbing alcohol is an offensive material. 

Step-1: As with the previous methods, lay the stained cloth on a clean towel. First, test a small area of the fabric with the rubbing alcohol to be sure if it is safe. If it is correct, then follow the following steps.

how to remove computer printer ink from clothes

Step-2: Now, pour a small quantity of rubbing alcohol on a clean piece of cloth and then rub it on the stains gently. Press the color with the fabric repeatedly and pour more rubbing alcohol into the cleaning cloth. Keep dabbing or pressing until the paint starts to come out. 

Step-3: Now, let it sit for more than five minutes. Now again, start to press the stain using the clean part of the cloth. When the stain is completely removed, rinse it with cold water. Now ash the cloth and air dry the fabric.

8. Remove Printer Ink by Vinegar and Cornstarch

Vinegar and cornstarch are readily available items in your home. When you have  to rush as you are busy and cannot find anything else, you can use them to remove printer ink from your cloth. These items are not effective enough for harsh ink stains. But it works well for fresh stains. Let’s know the steps.

Step-1: First, set the fabric as before on the clean white towel. Pour a tiny amount of white vinegar on the stain.

How To Remove Printer Ink From Clothes

Step-2: Make a mixture of vinegar and cornstarch in a 2:3 ratio. Mix well to make a paste-like consistency. 

Step-3: Apply the mixture to the stain in a heavy layer. Leave it to dry the paste. Now, rinse the stain with lukewarm water.

If the stain is clean, then wash it and dry it up in the air. But you may repeat the process several times as the vinegar and cornstarch are not so hard to remove the printer ink.

Final Words

The printer is a necessary office tool, and you need to handle it. Printers is nowadays an essential tool for photography too. While running it, messing with the printer ink is possible. It is common to have the printer ink stain on your cloth, especially when you are cleaning the printer parts and ink cartridges

How to remove printer ink from clothes? It will be beneficial if you know the practical items that remove printer ink and learn to use them. Cleaning the stain before it dries up is a wise job. But removing the old paint is also possible.

Here, you had got the most effective methods to remove printer ink from the fabric. Learn them and use what item is available to you. 

Leave a Comment

Your email address will not be published. Required fields are marked *